CATEGORY 6 U/UTP FLA...
CATEGORY 6 U/UTP FLAT PATCH CORD
Norden Category 6 UTP flat patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable ,and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance. Each patch cord is tested with Fluke tester and individual cover...
Overview Specifications Ordering Information
Overview
Norden Category 6 UTP flat patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable ,and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance. Each patch cord is tested with Fluke tester and individual cover...Specifications
COMPLIANCE
ANSI/TIA-568-C.2 and ISO/IEC-11801 (2nd Edition), IEC 61156-2,
EN 50173; EN 50288-6-2 Category 6 standard
DESIGN & MATERIALS
|
Cable Conductor |
Stranded Bare Annealed Copper |
|
Conductor Size |
30 AWG |
|
Wire Insulation |
PE |
|
Outer Jacket And Boots |
PVC |
|
Cable Width |
6.0 ± 1.6 mm |
|
Bend Radius |
23 mm without load |
|
Storage Temperature |
-20 °C to +80 °C |
|
Temperature Operating Range |
-20 °C to +75 °C |
|
Wire Scheme |
T568B |
ELECTRICAL DATA
|
Impedance @ 1-250 MHz |
100 ±15 Ω |
|
Resistance Unbalance |
20 MΩ max. |
|
Voltage Rating |
72V DC |
|
Dielectric Strength |
1 KV/min.rms |
|
Ampacity |
1.0 Amps max. |
|
Insulation Resistance |
150 MΩ/Km |
|
Pair to Ground Capacitance Unbalance |
3.3 nF/Km nom. |
MECHANICAL & TRANSMISSION DATA
|
Cable To Plug Tensile Strength |
96 N min. |
|
Pulling Force |
10 N max. |
|
Durability |
1000 Mating Cycles |
|
Propagation Delay 1-250 MHz |
< 45 ns/100m |
Ordering Information
| Part Number | Description | Length |
|
12F-31101X |
Category 6 U/UTP Flat Patch Cord PVC 01m |
1m |
|
12F-31102X |
Category 6 U/UTP Flat Patch Cord PVC 02m |
2m |
|
12F-31103X |
Category 6 U/UTP Flat Patch Cord PVC 03m |
3m |
|
12F-31105X |
Category 6 U/UTP Flat Patch Cord PVC 05m |
5m |
X: GY(Gray)
